Pico Series M & MV Low Profile Isolated DC-DC Converters

　　Pico Electronics Series M and Series MV are ultra-miniature, isolated proportional DC-DC converters designed for compact electronic systems that require reliable isolated power conversion. These converters are supplied in epoxy insulated shielded metal cases and are available in low-voltage single/dual output versions and high-voltage output versions.

　　The Series M family provides single and dual isolated outputs such as 3.3V, 5V, 12V, 15V, 24V, 28V and 48V. The Series MV family is designed for high-voltage output applications, with output voltages from 100V up to 500V. Both series are suitable for applications where small size, isolation, wide temperature performance and high reliability are required.

　　Key Features

　　1.25W isolated proportional DC-DC converter

　　Ultra-miniature low profile package

　　Single and dual isolated outputs for Series M

　　High-voltage outputs up to 500V for Series MV

　　Nominal input options include 5V, 12V, 15V, 24V and 28V

　　Operating temperature range: -55°C to +85°C without derating

　　Up to 1000VDC isolation for Series MV

　　MIL-screened / military qualified components

　　Five-sided or six-sided epoxy insulated shielded metal case

　　No heat sink or active cooling required

　　General Specifications

　　Series M Single Output Models

Series M Dual Output Models

　Series MV High Voltage Output Models

　　Selection Guide

　　For low-voltage isolated power rails, choose Series M single output models such as 5M5S, 12M12S, 24M15S or 28M24S. These models are suitable when the system needs one isolated DC output in a compact through-hole package.

　　For applications requiring two isolated outputs, choose Series M dual output models such as 5M12D, 12M15D, 24M24D or 28M48D. The output voltage and current are specified per output.

　　For high-voltage bias or signal circuits, choose Series MV models such as 5MV100, 12MV300, 24MV500 or 28MV500. The MV series provides high-voltage outputs from 100V to 500V with 1000VDC isolation.

　　Design Notes

　　Series M converters require a 10µF, 75V high-quality low ESR capacitor across the output. For dual output models, the capacitor should be connected across each output.

　　Series MV converters require a 0.1µF, 1kV capacitor across the output. A minimum load of 10% of rated load should be maintained to prevent voltage surge.

　　Typical Applications

　　Pico Series M and MV DC-DC converters can be used in compact electronic systems, instrumentation, military electronics, aerospace equipment, isolated analog circuits, high-voltage bias supplies, sensor interfaces and other applications requiring small isolated power modules.

　　Product Inquiry

　　Please provide the required input voltage, output voltage, output type, quantity and application requirements. We can help confirm the proper Pico Series M or Series MV part number and provide quotation, lead time and datasheet support.

PICO Components – Available Stock | Multiple Models, Fast Delivery

　DataStorageIC is a distributor of PICO Company. We offer imported PICO power modules, military power modules, high-voltage power modules, small transformers, MIL-PRF-21038/27 specification transformers, pulse transformers, and 400 MHz power transformer, MIL-STD-1553 interface transformer, audio transformer, power inductor, micro power inductor, EMI inductor, thin DC-DC power module, military DC-DC power module, brick DC-DC power module, high-voltage DC-DC, AC-DC power module, switching DC power module, isolated power module Functional power modules such as aviation power modules and power converters. Original imported products, quality guaranteed. Welcome to inquire.