AFB0612VH-AF00 Delta 12V DC Axial Fan with Tachometer
Part Number: AFB0612VH-AF00
Manufacturer:Delta Electronics
Series: AFB
Product Type: DC Axial Cooling Fan
Rated Voltage: 12V DC
Frame Size: 60 × 60 × 25.4mm
Signal Function: Speed Sensor / Tachometer
Bearing Type: Ball Bearing
Part Status: Active
Stock: Contact us for current stock, price, lead time and replacement availability.
AFB0612VH-AF00 Delta 12V DC Axial Fan with Tachometer
The Delta AFB0612VH-AF00 is a 12V DC axial cooling fan with a 60 × 60 × 25.4mm frame and three lead wires. It provides a tachometer output that allows the host system to monitor fan speed and detect abnormal cooling conditions.
Operating at 5500 RPM, the AFB0612VH-AF00 delivers 30.48 CFM airflow and maximum static pressure of 0.345 inchH2O. Its compact 6025 format is suitable for communication equipment, industrial controllers, power supplies and electronic systems requiring high airflow from a limited installation area.
Technical Specifications
| Parameter | Specification |
|---|---|
| Fan Type | DC Axial Fan |
| Rated Voltage | 12V DC |
| Operating Voltage Range | 7.0–14.0V DC |
| Rated Current | 0.23A |
| Rated Power | 2.76W |
| Dimensions | 60 × 60 × 25.4mm |
| Airflow | 30.48 CFM / 0.863 m³/min |
| Maximum Static Pressure | 0.345 inchH2O / 8.76 mmH2O |
| Fan Speed | 5500 RPM |
| Noise Level | 42.5 dB(A) |
| Bearing Type | Ball Bearing |
| Signal Function | Speed Sensor / Tachometer |
| Termination | 3 Lead Wires |
| Operating Temperature | -10°C to +70°C |
| Rated Lifetime | 70,000 Hours at 40°C |
| Weight | 80g |
| Frame Material | Plastic |
| Impeller Material | Plastic |
| Ingress Protection | Not Specified |
Applications
The AFB0612VH-AF00 can be used for cooling in:
Telecom and networking equipment
Industrial computers and embedded systems
Servers and data-storage equipment
AC/DC and DC/DC power supplies
PLC and automation controllers
Inverters and motor drives
Test and measurement instruments
Medical and laboratory equipment
Compact electronic enclosures
Equipment requiring fan-speed monitoring
Tachometer Function
Unlike a standard two-wire fan, the AFB0612VH-AF00 uses a third lead for tachometer output. This signal allows the system controller to monitor rotational speed and identify a stopped, blocked or underperforming fan.
The tachometer signal does not provide PWM speed control. If the original equipment requires a four-wire PWM fan, the AFB0612VH-AF00 should not be used as a direct replacement unless the control interface is redesigned.
The connector, wire sequence and signal voltage should be checked against the original equipment documentation before installation.
AFB0612VH-AF00 Replacement Selection
A compatible replacement should match the following requirements:
60 × 60 × 25.4mm mechanical dimensions
12V rated supply
Mounting-hole positions
Three-wire connection
Tachometer signal requirements
Connector type and pin assignment
Minimum airflow of approximately 30.48 CFM
Required static-pressure performance
Rated and starting current
Airflow and rotation direction
Operating temperature and bearing life
A standard 6025 fan may fit mechanically but may lack the required airflow, static pressure or tachometer output. The complete AFB0612VH-AF00 part number and connector configuration should be confirmed before ordering a replacement.
Stock and Lead Time
Stock and delivery time depend on order quantity, production lot and connector requirements. DataStorageIC can support AFB0612VH-AF00 sourcing and provide compatible replacement fans based on dimensions, voltage, airflow, static pressure, tachometer output and wiring.
Send the complete fan label, required quantity, connector photo and equipment application to request AFB0612VH-AF00 stock, price, lead time or replacement recommendations.
