PFR0812DHE-F00 Delta 12V 80mm High-Pressure DC Axial Fan
Part Number: PFR0812DHE-F00
Manufacturer: Delta Electronics
Series: PFR
Product Type: DC axial cooling fan
Rated Voltage: 12V DC
Frame Size: 80 × 80 × 38mm
Bearing Type: Ball bearing
Speed Feedback: Tachometer output
Termination: 3 lead wires
Part Status: Active
Stock: Contact us for current availability and lead time
Delta PFR0812DHE-F00 12V High-Pressure DC Axial Fan
The PFR0812DHE-F00 is a high-performance DC axial cooling fan from Delta Electronics’ PFR series. It operates from a nominal 12V DC supply and uses an 80 × 80 × 38mm frame.
With a maximum speed of 11,000 RPM, maximum airflow of 109.70 CFM and maximum static pressure of 2.187 inchH₂O, the PFR0812DHE-F00 is designed for equipment with dense internal structures and high airflow resistance. Typical applications include GPU and AI servers, storage systems, telecom equipment, industrial computers and other high-heat-density electronic equipment.
The F00 version uses three lead wires and includes a speed sensor output, allowing the host system to monitor fan rotation. It does not provide PWM speed-control functionality.
Technical Specifications
| Parameter | Specification |
|---|---|
| Rated voltage | 12V DC |
| Operating voltage range | 7.0–13.2V DC |
| Rated current | 2.10A |
| Rated power | 25.20W |
| Frame dimensions | 80 × 80 × 38mm |
| Fan type | DC axial fan |
| Maximum speed | 11,000 RPM |
| Maximum airflow | 109.70 CFM / 3.106m³/min |
| Maximum static pressure | 2.187 inchH₂O / 55.55mmH₂O |
| Noise level | 66.0dB(A) |
| Bearing | Ball bearing |
| Speed monitoring | Speed sensor / tachometer |
| Lead wires | 3 |
| Operating temperature | −10°C to +70°C |
| Expected lifetime | 70,000 hours at 40°C |
| Weight | Approximately 260g |
| Frame material | Plastic |
| Blade material | Plastic |
| Ingress protection | Not specified |
Airflow and static-pressure figures are maximum values measured at different points of the fan performance curve. The actual operating airflow depends on the resistance of the equipment’s complete airflow path.
Typical Applications
The Delta PFR0812DHE-F00 is suitable for cooling systems that require both high airflow and strong pressure capability, including:
GPU, AI and high-density computing servers
RAID, NAS and enterprise data-storage systems
Network switches, routers and telecom equipment
Industrial computers and edge-computing systems
Power supplies, rectifiers and electronic load equipment
Battery energy-storage control cabinets
Automated test and measurement equipment
High-density electronic enclosures
Replacement of failed Delta PFR0812DHE-F00 fans
High Static Pressure for Restrictive Airflow Paths
The fan’s maximum static pressure of 55.55mmH₂O makes it suitable for equipment containing restrictive components such as densely packed heat sinks, drive cages, filters, cable bundles and narrow ventilation channels.
When selecting a replacement, airflow alone should not be used as the only criterion. A lower-pressure fan may fit the same mounting position but fail to move sufficient air through the actual equipment.
Speed Monitoring Function
The PFR0812DHE-F00 has three lead wires: two for fan power and one for the tachometer signal. The speed-feedback signal can be used by the host controller to:
Monitor whether the fan is rotating
Detect fan failure or abnormal speed
Trigger equipment alarms
Support preventive maintenance
Improve cooling-system reliability
The tachometer signal should not be confused with a PWM control input. If the equipment requires four-wire PWM control, verify the complete Delta part number and control interface before ordering.
Power Supply and Noise Considerations
At its rated operating point, the fan consumes approximately 25.20W and draws 2.10A from a 12V supply. The equipment power supply, PCB traces, wiring and connector should have adequate current capacity, including suitable allowance for fan startup conditions.
The specified noise level is 66.0dB(A). This model is primarily intended for performance-oriented server, telecom and industrial applications where cooling capability takes priority over low acoustic noise. It is generally unsuitable for quiet office or consumer-PC applications.
Replacement Selection
When replacing a PFR0812DHE-F00, verify the following parameters:
Complete part number: PFR0812DHE-F00
Rated voltage: 12V DC
Operating voltage range: 7.0–13.2V DC
Frame dimensions: 80 × 80 × 38mm
Rated current: 2.10A
Airflow and static-pressure requirements
Three-wire tachometer interface
Wire length, connector type and pin sequence
Airflow direction and mounting orientation
Fans with the same 80mm frame size are not necessarily interchangeable. Differences in current, thickness, connector, pin assignment, rotational-speed signal and pressure performance may prevent correct operation.
Do not replace the three-wire PFR0812DHE-F00 with a two-wire or four-wire version without checking the equipment interface. Connector housings and wire colors can also vary between customer-specific suffixes.
Stock, Pricing and Lead Time
DataStorageIC can assist with sourcing the original Delta PFR0812DHE-F00, compatible suffix versions and technically matched replacement fans.
For an accurate quotation, please provide:
Required quantity
Target delivery date
Shipping destination
Clear photograph of the fan label
Connector and wire photograph
Wire length and pin sequence
Equipment model or application
Required inspection or traceability documents
Contact us for current stock, unit price, lead time, datasheet support and replacement-model evaluation.



