The SOURIAU UTG01412PH is a sealed 12-position square-flange receptacle from the Eaton SOURIAU UTG industrial connector series. It is designed for fixed panel mounting and uses a shell size 14 housing with 12 size #16 contact cavities.

A 1/3-turn bayonet interface enables fast connection to a compatible cable plug. The H suffix identifies the IP65 sealed version, making UTG01412PH more suitable for dusty or moisture-exposed equipment than the standard IP40 UTG01412P.

This connector is supplied without contacts. Male crimp contacts must be ordered separately according to the conductor size and required contact finish.

Technical Specifications

Specification	Value
Connector series	Eaton SOURIAU UTG
Connector type	Receptacle housing
Receptacle style	Square flange / wall mount
Mounting style	Panel mount
Shell size	14
Insert arrangement	14-12
Number of positions	12
Contact cavities	12 × size #16
Contact gender	Pin / male configuration
Contact termination	Crimp
Contact delivery	Contacts not included
Coupling system	1/3-turn bayonet
Shell construction	Metal and plastic
Insert material	Polyamide
Protection rating	IP65
Operating temperature	−40°C to +105°C
Mating durability	500 cycles
Salt-spray resistance	48 hours
Flammability rating	UL94 V-0
Approximate dimensions	31.7 × 28.6 × 28.6 mm
Approximate weight	11 g
Environmental compliance	RoHS and REACH

UTG01412PH vs UTG01412P

Model	Protection rating	Recommended use
UTG01412PH	IP65	Exposed industrial equipment, dusty areas and moisture-prone installations
UTG01412P	IP40	Indoor or protected equipment where environmental sealing is not required

Both models use the same shell size 14, layout 12 and male size #16 contact configuration. The environmental protection requirement should therefore be confirmed before ordering.

Contacts Required

UTG01412PH requires up to 12 separately ordered male size #16 crimp contacts.

Contact model	Packaging	Contact configuration
SM16ML1TK6	Loose piece	Male stamped-and-formed crimp contact
SM16ML11TK6	Loose piece	Male stamped-and-formed crimp contact
SM16M1TK6	Reel	Male stamped-and-formed crimp contact
SM16M11TK6	Reel	Male stamped-and-formed crimp contact

Contact selection depends on conductor size, insulation diameter, contact finish and crimping equipment. Electrical ratings also depend on the installed contact, wire and operating conditions.

Unused contact cavities can be fitted with SMSPKE0 false pins when cavity blocking or connector discrimination is required.

Compatible Mating Plug

The standard mating cable plug is:

Mating model	Connector style	Contact configuration
UTG61412SN	Straight cable plug	12 female size #16 crimp contacts, N orientation, IP65

The mating plug must use shell size 14, layout 12 and female socket contacts. A plug with male pin contacts, such as UTG61412PN, cannot mate with the male contact configuration of UTG01412PH.

Panel and Harness Accessories

Depending on the installation, the following shell size 14 accessories may be required:

Accessory	Function
UTG14PG	Plastic cable gland with strain relief
UTG14ST	Plastic sealing gland
UTG14AC	Plastic cable clamp with strain relief
UTG14AD	Metal heat-shrink boot adapter
UTG14LPGN	Metal right-angle cable clamp
Protective cap	Protects the unmated receptacle against contamination

Cable accessories are normally installed on the mating plug rather than the fixed flange receptacle.

Typical Applications

Industrial Control Panels

The square-flange design allows the connector to be mounted on control cabinets, junction boxes and equipment enclosures.

Factory Automation

Twelve contacts can carry sensor, actuator, communication and control circuits in production machinery and automated handling systems.

Motor and Drive Systems

UTG01412PH can provide a removable interface between motor wiring, feedback circuits and drive electronics.

Robotics

The quick bayonet connection supports modular robotic equipment, mobile platforms and replaceable tool assemblies.

Transportation Equipment

The IP65 housing and vibration-resistant coupling suit railway equipment, commercial vehicles and material-handling machinery.

Test Equipment

The 500-cycle mating durability supports test fixtures and maintenance systems requiring repeated connection.

Request a Quote for UTG01412PH

Contact us for current UTG01412PH stock, price and lead time. We can also help select the UTG61412SN mating plug, size #16 contacts, protective cap and assembly tooling.