Narda-MITEQ NMPD-0102-2 1–2GHz 2-Way Power Divider
Mfr. Part #: NMPD-0102-2
Manufacturer: Narda-MITEQ
Product Type: RF/Microwave Power Divider
Frequency Range: 1 GHz to 2 GHz
Configuration: 2-Way
Description: 1 GHz to 2 GHz 2-Way Power Divider, SMA Female, 0.3 dB Max Insertion Loss, 25 dB Min Isolation, 30 W
The Narda-MITEQ NMPD-0102-2 is a general-purpose 2-way RF power divider designed for operation from 1 to 2 GHz. It distributes one input signal between two output ports while maintaining low insertion loss and close amplitude and phase tracking.
The NMPD-0102-2 provides 0.3 dB maximum insertion loss, 25 dB minimum isolation, ±0.2 dB amplitude balance, and ±2° phase balance. Its SMA female connectors and 30 W average input-power capability make it suitable for L-band communications, radar, telemetry, RF testing, and multichannel signal-distribution systems.
Contact DataStorageIC to check the latest NMPD-0102-2 price, stock status, lead time, datasheet, and purchasing options.
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Narda-MITEQ |
| Part Number | NMPD-0102-2 |
| Product Type | RF/Microwave Power Divider |
| Product Series | NMPD General-Purpose Power Dividers |
| Divider Configuration | 2-Way |
| Frequency Range | 1 to 2 GHz |
| Connector Type | SMA Female |
| Maximum Insertion Loss | 0.3 dB |
| Minimum Isolation | 25 dB |
| Amplitude Balance | ±0.2 dB maximum |
| Phase Balance | ±2° maximum |
| Maximum Input VSWR | 1.20:1 |
| Maximum Output VSWR | 1.20:1 |
| Average Input Power | 30 W* |
| Test Data | Supplied at +25°C |
| ECCN | EAR99 |
*The manufacturer guarantees the 30 W average power rating with source and load VSWR values of 1.2:1.
RF Performance Summary
| Performance Item | Value | Design Consideration |
|---|---|---|
| Frequency Range | 1–2 GHz | Covers common L-band RF applications |
| Insertion Loss | 0.3 dB max. | Helps reduce additional signal-distribution loss |
| Isolation | 25 dB min. | Limits interaction between the two output paths |
| Amplitude Balance | ±0.2 dB max. | Supports consistent output-channel levels |
| Phase Balance | ±2° max. | Suitable for phase-sensitive multichannel systems |
| Input/Output VSWR | 1.20:1 max. | Provides a well-matched 50-ohm RF interface |
| Average Input Power | 30 W | Subject to specified source and load VSWR |
Typical Applications
L-band communication systems
Radar and telemetry equipment
RF signal-distribution networks
Antenna and receiver systems
Multichannel RF test equipment
Signal generators and spectrum-analyzer setups
Laboratory measurement systems
Amplifier and receiver evaluation platforms
