VICOR VI-JT2-CW / VE-JT2-CW Replacement: CINCON CHB100-110S15 15V 100W DC-DC Converter
VICOR VI-JT2-CW / VE-JT2-CW Replacement: CINCON CHB100-110S15 15V 100W DC-DC Converter
When engineers or buyers need a replacement option for VICOR VI-JT2-CW or VE-JT2-CW, one suitable alternative to evaluate is the CINCON CHB100-110S15 isolated DC-DC converter. These models are commonly used in systems requiring a high-voltage DC input range, regulated 15V output, isolated power conversion, and a compact half-brick package.
The CINCON CHB100-110S15 is a 100W isolated DC-DC converter with a 66–160VDC input range and 15VDC single output, making it a practical replacement candidate for applications using Vicor VI-JT2-CW / VE-JT2-CW power modules. It is especially suitable for industrial, railway, automation, communication, and distributed power architecture applications where 110V nominal DC bus input and regulated 15V output are required.
Replacement Overview
The Vicor part numbers VI-JT2-CW and VE-JT2-CW belong to the VI-J00 / VE-J00 half-brick DC-DC converter family. Based on the model code, these modules are configured for:
110V nominal input range
15V single output
C-grade operating temperature range
100W output power class
Half-brick isolated DC-DC converter package
The CINCON CHB100-110S15 matches the key electrical requirements of the Vicor models, including input range, output voltage, power rating, isolation level, and package size. However, as with any power module replacement, the final selection should be verified according to the PCB layout, pin assignment, control logic, thermal design, EMI circuit, derating curve, and system certification requirements.
Parameter Comparison
| Parameter | VICOR VI-JT2-CW / VE-JT2-CW | CINCON CHB100-110S15 | Replacement Notes |
| Product Type | Isolated DC-DC Converter | Isolated DC-DC Converter | Same converter category |
| Package / Case | Half Brick | Half Brick | Similar industry package size |
| Input Voltage Range | 66–160VDC | 66–160VDC | Matched input range |
| Nominal Input Voltage | 110VDC | 110VDC | Suitable for 110V DC bus systems |
| Output Voltage | 15VDC | 15VDC | Matched output voltage |
| Output Power | 100W | 100W | Matched power class |
| Output Current | Approx. 6.7A | 6.7A | Suitable for 15V 100W applications |
| Isolation Voltage | 3000VAC / VRMS class | 3000VAC I/O | Similar isolation class |
| Efficiency | Up to 90% family level | 87.5% typical for 15V model | Efficiency should be checked under real load |
| Operating Case Temperature | C grade: -25°C to +100°C | -40°C to +100°C | CINCON offers wider low-temperature capability |
| Output Trim | Supported | ±10% | Verify trim circuit before replacement |
| Remote Sense | Supported | Supported | Check sense wiring and compensation |
| Remote On/Off | Logic disable / gate control | Remote On/Off | Control logic must be verified |
| Protection Features | Current limit, short-circuit restart | OTP, OCP, OVP, UVLO, short-circuit protection | CINCON provides multiple protection functions |
| Typical Applications | Industrial power, distributed power systems | Railway, industrial, communication, automation | Application overlap is strong |
Application Areas
The CINCON CHB100-110S15 can be considered for replacing Vicor VI-JT2-CW / VE-JT2-CW in applications such as:
Industrial control systems
Railway power equipment
Communication power systems
Automation equipment
Distributed power architecture
High-voltage DC bus conversion
15V auxiliary power supply design
Instrumentation and embedded systems
Transportation electronics
Rugged industrial DC power platforms
Contact Us for VICOR VI-JT2-CW / VE-JT2-CW Replacement Support
If you are looking for a replacement or alternative solution for VICOR VI-JT2-CW or VE-JT2-CW, the CINCON CHB100-110S15 can be evaluated as a suitable 15V 100W isolated DC-DC converter option.
We can help you check model compatibility, compare key parameters, confirm stock availability, and provide technical selection support based on your application requirements.
For pricing, lead time, datasheet, or replacement confirmation, please contact us with your original part number, required quantity, and application details. Our team will help you find a reliable DC-DC converter solution for your project.
